Project

General

Profile

OT: What water pump are you using?

Added by acubino over 2 years ago

This post is some offtopic, because is not all for Laos Laser.

I lost my job and I have a lot of free time for made my old proyect with laos laser. I need to put the machine in the new emplacement, but i don't have a lot of free space for the water pump and the water.

My machine is standar 40W CO2. For now i have a chinesse sumersible water pump at 1100L hour, but i'm thinking in some smaller, because i need have smaller water deposit and this pump is really bigger.

What water pump are using for 40W CO2?, a smaller pump like this at 600 Liters hour, will be valid?.
http://www.aliexpress.com/item/2015-12V-New-DC-1-2A-Micro-Submersible-Motor-Water-Pump-5M-14L-Min-840L-H/32524059583.html

Thanks.


Replies (1)

RE: OT: What water pump are you using? - Added by jegb about 2 years ago

using a small fishtank pump, perhaps if you add a flow detector and a temp sensor on the tank, can get an idea if the flow is cooling or not.

    (1-1/1)