Project

General

Profile

Bug #71

CANbus connector error on Rev4

Added by Anonymous almost 7 years ago. Updated about 5 years ago.

Status:
Closed
Priority:
Normal
Assignee:
-
Category:
Mainboard
Target version:
-
Start date:
2013-01-12
Due date:
% Done:

0%

Description

I'm sorry I missed this before production, but it looks like the RJ11 jack added to the Rev4 board is mirrored: the way the holes are now, the Jack can only be mounted on the bottom side of the PCB.

Anything that can go wrong, will -- Murphy

History

#1 Updated by peter almost 6 years ago

  • Status changed from New to In Progress

#2 Updated by peteruithoven about 5 years ago

  • Status changed from In Progress to Closed

Also available in: Atom PDF