Project

General

Profile

Hardware development

Participate in the LAOS electronics hardware design

Subject Author Created Replies Last message
Rev6 ideas jegb 2015-12-02 14:14 3 Added by Springuin over 2 years ago
RE: Rev6 ideas
Adding a rotation axis (bottle cutter) peteruithoven 2013-12-07 17:16 1 Added by peteruithoven over 2 years ago
RE: Adding a rotation axis (bottle cutter)
FreescaleTM i.MX 6SoloX peteruithoven 2015-04-24 10:52 0
Why is p20 connected to p24 for xstep? parag0n 2015-04-14 13:59 4 Added by parag0n about 3 years ago
RE: Why is p20 connected to p24 for xstep?
part listing for US customers jaap 2014-11-22 15:03 0
Modifications for high speed PWM and laser control outputs HackerspaceFFM 2014-11-09 18:34 2 Added by HackerspaceFFM over 3 years ago
RE: Modifications for high speed PWM and laser control ou...
Micro SD card problem joostn 2014-08-02 13:53 4 Added by jaap almost 4 years ago
RE: Micro SD card problem
Upcoming rev 5 mainboard Springuin 2013-12-23 21:12 9 Added by Springuin about 4 years ago
RE: Upcoming rev 5 mainboard
focus and pixel size issues reinoud 2014-03-25 17:58 0
LaOS board Rev0.5 is available jaap 2014-03-11 14:10 0
MicroSlice peteruithoven 2014-02-12 07:36 2 Added by peteruithoven over 4 years ago
RE: MicroSlice
Y-axis does not react. arjan 2014-01-17 21:22 6 Added by jaap over 4 years ago
RE: Y-axis does not react.
DA converter versus PWM for laser power reinoud 2013-12-12 14:53 4 Added by KalleP over 4 years ago
RE: DA converter versus PWM for laser power
Using BeagleBoneBlack / Raspberry pi / CubieBoard peteruithoven 2013-10-08 16:34 7 Added by peteruithoven over 4 years ago
RE: Using BeagleBoneBlack / Raspberry pi / CubieBoard
Schematics markp 2012-09-08 13:37 6 Added by jaap over 4 years ago
RE: Schematics
Different board layout for alternative to mbed bruce33 2013-10-25 00:58 0
water flow meter hugomeiland 2013-02-21 13:43 5 Added by drayde over 4 years ago
RE: water flow meter
What PWM frequency peteruithoven 2013-03-13 02:35 7 Added by KalleP over 4 years ago
RE: What PWM frequency
path issue david.eickhoff 2013-08-13 15:52 3 Added by david.eickhoff almost 5 years ago
RE: path issue
Nintendo Wii Nunchuck as a joystick KalleP 2013-08-02 17:18 2 Added by Springuin almost 5 years ago
RE: Nintendo Wii Nunchuck as a joystick
Laos MainBoard (re) design for buildlog interface cerocca 2013-06-28 20:32 3 Added by jaap almost 5 years ago
RE: Laos MainBoard (re) design for buildlog interface
Display board design, time for update? jaap 2013-03-11 15:10 16 Added by jaap about 5 years ago
RE: Display board design, time for update?
Warning: SD card might fall off on Rev4 boards! jaap 2013-04-26 21:44 1 Added by Techrat about 5 years ago
RE: Warning: SD card might fall off on Rev4 boards!
Sharing test patterns peteruithoven 2013-03-17 15:32 0
Wiring for using power control with Visicut dovadi 2012-11-11 11:27 1 Added by hugomeiland over 5 years ago
RE: Wiring for using power control with Visicut
(1-25/27) Per page: 25, 50

Also available in: Atom