LAOS CUPS driver OSX » History » Version 8

Version 7 (m.winkler, 2012-11-20 01:25) → Version 8/10 (m.winkler, 2012-11-20 01:30)

h1. LAOS CUPS driver installation under Mac OSX 10.7


This was only tested on Mac OSX 10.7
if you use an other version of Mac OSX just give it a try

h2. Before you start

h3. Requirements :

You will need Apples Xcode + Apple's Command Line Developer Tools

read, that should provide you with all you need

h3. Environment:

If you have macports or homebrew installed make shure your PATH variable lists

/usr/bin /bin /usr/sbin /sbin before any other bin or sbin directories

example macports

$ echo $PATH
$ export PATH="/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin:/Users/user/bin/:/Users/user/bin/"

if you want to check against which libraries your programm has been linked use

$ otool -L <notextile><</notextile>binary<notextile>></notextile>

make shure that you don't link against /opt/local/lib, this is a macports library path and shouldn't be used if you want to
have a native OSX installation

if you run in problems with the linking use

$ LDFLAGS="-L/usr/lib" ./configure

that will force the linker to search /usr/lib first.

h2. Installation of dependencies and laos-cups

h3. ghostscript

read first

$ wget
$ tar -xvzf ghostscript-9.06.tar.gz
$ cd ghostscript-9.06
$ ./configure
$ make
$ sudo make install

h3. GraphicsMagick

This is work in progress, pstoedit uses Magick++ so i compiled it but stripped almost everything to have a clean compile without installing
further dependencies, need to have a look in pstoedit/src/drvlaos.cpp to see what is actually used for image manipulation

$ wget
$ tar -xvzf GraphicsMagick-1.3.17.tar.gz
$ cd GraphicsMagick-1.3.17/
$ ./configure --disable-openmp --without-bzlib --without-jbig --without-jpeg --without-jp2 --without-lcms --without-lcms2 --without-lzma --without-png --without-tiff --without-trio --without-ttf --without-wmf --without-xml --without-zlib --without-x --without-png
$ make
$ sudo make install

pstoedit will look for Magick++-config instead of GraphicsMagick++-config
so we create a link to cover this

$ sudo ln -s /usr/local/bin/GraphicsMagick++-config /usr/local/bin/Magick++-config

h3. tftp-hpa

the OSX tftp client doesn't work with cups-laos, install the extended version

$ wget
$ tar -xvzf tftp-hpa-5.2.tar.gz
$ cd tftp-hpa-5.2
$ ./configure --without-ipv6
$ make

backup the original, and install tftp-hpa

$ sudo cp /usr/bin/tftp /usr/bin/tftp.orig
$ cp tftp/tftp /usr/bin/tftp

h3. pstoedit

after gostscript and GraphicsMagick is installed pstoedit will compile

$ git clone -b laos
$ cd pstoedit
$ ./configure
$ make
$ sudo make install

h3. cups-laos cups backend + ppd

$ git clone
$ cd Softwate/cups-laos/src
$ make
$ sudo cp cups-laos /usr/libexec/cups/backend/
$ sudo chmod 755 /usr/libexec/cups/backend/cups-laos

read section "Installing PPD Files"

$ sudo mkdir /Library/Printers/PPDs/Contents/Resources/en.lproj
$ sudo cp CUPS-LAOS.ppd /Library/Printers/PPDs/Contents/Resources/en.lproj
$ sudo chmod 755 /Library/Printers/PPDs/Contents/Resources/en.lproj/CUPS-LAOS.ppd

h2. Install the laser cutter under CUPS

now you can add a laser cutter eader trough http://localhost:631
or OSX System Preferences -> Printer -> + -> cups-laos

h2. Notes

h3. Bug: device URI can't be changed while installing laser cutter in CUPS admin panel

Connection is allways "cups-laos://" and can only be changed
by editing /etc/cups/printers.conf

search for

DeviceURI cups-laos://

and replace with the destination of your laser cutter

h3. "wget: command not found"

if you are not using macports or homebrew but have already Apples Xcode + Apple's Command Line Developer Tools installed,
you can install wget with

$ curl -o wget-latest.tar.gz
$ tar xzf wget-latest.tar.gz
$ cd wget-x.y.z # Verzeichnis, das im latest Archiv verpackt war, z.B. wget-1.11.4
$ ./configure
$ make
$ sudo make install

otherwise just download the sources with your browser